ATEN Global Service Site


Subject :
	How to stop Scan Mode for CN6000

Description :
	We have a KVM CN6000. It is currently in scan mode, scanning through all the ports every 3 seconds. But we have no idea how to stop the scan mode. We try to bring up the menu again, too see all the ports etc, but it is not working while it is scanning. How do we stop it from scanning?

Solution :
	Basically, CN6000 does not have the scan function, so it is the function of a KVM switch which is connected to the KVM port of your CN6000. If the KVM switch is from ATEN, please just press [Esc] or [Space] key to stop the scanning action; if the KVM switch is not made by ATEN, please refer to the manual of that KVM switch to find the solution.

Related FAQ :
	CS1308 - 韧体问题
	VS291 - 支持最远距离
	제품 문의
	2X-UCE50的支援距離
	CE610 supports resolution and distance.


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you