ATEN Global Service Site


Subject :
	CS22U Display issue

Description :
	When connecting both computers through the CS22U KVM， only one of the computers recognizes the monitor as a Dell E2313H and displays the full 1920 x 1080 screen resolution. The other PC sees the monitor is a "generic non-PnP monitor"， which does not support 1920 x 1080 (and I am forced to use a lower). The computer that boots up first is the one that recognizes the monitor as a Dell E2313H. How can I make both PCs recognize the monitor as a Dell E2313H?

Solution :
	The CS22U has an EDID bypass feature, however CS22U should be focused on the computer as it’s booting to apply the correct EDID information 1. KVM focus on Port 1 2 Start the computer attached to port 1 the EDID will be detected 3. Focus Port 2 4. Start the computer attached to port 2 the EDID will be detected NOTE: This applies to all monitors exhibiting this issue

Related FAQ :
	CS9138 캐스케이드 케이블
	Discovering VK2100 in a DHCP enabled LAN
	KA 콘솔 / 랙 마운트
	OSD整合
	USB3.2 Gen1に対応しているか?(US234/US434)


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you