ATEN Global Service Site


Subject :
	EDID Setting of VM5808H for Video and Audio Detection with VC880

Description :
	There is no audio out when a VC880 is connected to a VM5808H.

Solution :
	There are two EDID settings in the VM5808H - ATEN Default, and Port 1. - If the VM5808H EDID mode is set to port 1，the VC880 must be connected to a HDMI monitor. If there is no monitor on port 1 there is no source for EDID information thus no audio - If the VM5808H EDID mode is set to ATEN Default, the audio works properly because EDID information is supplied internally by the VM5808H

Related FAQ :
	Seamless switch limitation
	"Initialization Error" is prompted when opening KVM viewer from Linux PC?
	1080i
	CS682/CS64US - 韧体升级
	CS682/CS64US firmware upgrade.


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you