ATEN Global Service Site


Subject :
	MST mode / 4K monitors no display

Description :
	When connecting CS1924 to one monitor, 4K@60Hz output works fine, but if two or more monitors connected to the KVM Switch, the display is lost after 5-6 iterations of switching between display ports. Usually results in a black screen, and then after refresh causes a resolution change in the monitor. Each experiment was tested with both the stock firmware, and the latest firmware (v1.1.104) as well as the cables that were provided in the packaging.

Solution :
	DisplayPort 1.2 doesn't support daisy chain monitors if the output resolution is 4K@60Hz due to bandwidth limits. Please use 4K@30Hz output instead. The detail please refer to the DisplayPort Official website . https://www.displayport.org/cables/driving-multiple-displays-from-a-single-displayport-output/

Related FAQ :
	CS682/CS692 Current Hotkey status of my KVM
	Which Network Switches support ATEN KE/KX/VE series devices ?
	CS1308 no login screen
	CS22U Display issue
	DP KVM 连接 NVIDIA RTX30 系列显卡可能会在PC开机时遇到黑屏


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you