ATEN Global Service Site


Subject :
	SN0116 Direct HyperTerminal Connection

Description :
	How do I access the SN0116 via HyperTerminal Connection?

Solution :
	Please follow the procedures below. - Installation Use an Ethernet cable and RJ-45-to-Serial Adapter (ex. SA0141) to connect one of the SN0116 serial ports to a COM port on a PC. Port 1 on the SN0116 is the default for Console Ports. - Set up 1. On the PC, run the HyperTerminal application. 2. Set the serial communication parameters to match the SN0116’s default settings: 9600 bps, 8 Data bits, No Parity, No Stop bits. 3. Key in [Ctrl + D] after all confirmations are done and make sure the connection is online. A login prompt for the SN0116 will appear. Key-in the Username and Password to bring up the SN0116’s main menu.

Related FAQ :
	CN8000 Virtual Media Function
	CS1924 제품과 CS1924M제품의 차이점
	VS201 can support Automatic incoming signal selection
	"다른 인증 사용 안함"이 선택된 상태에서 CC2000에 추가 된 장치에 직접 액세스 할 수 있습니까?
	Console port of CS1768 connect with CE600 or CL6700 can not work


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you