ATEN Global Service Site


Subject :
	Can we manually write the EDID of the CN9600's local monitor to the CN9600?

Description :
	Can we manually write the EDID of the CN9600's local monitor to the CN9600?

Solution :
	Yes Upgrade CN9600 firmware to V1.1.106 or later to have this function. To upgrade the firmware, please download the firmware and manual from https://www.aten.com/global/en/supportcenter/downloads/?q=CN9600 Please check the manual for how to upgrade firmware. After the firmware upgrade, please go to Basic setting--->Maintenance--->Update Display Information and manually write EDID. For more information, please refer to the manual If you still have problems, please contact ATEN Tech Support

Related FAQ :
	UH3234 可否同时连接HDMI与VGA?
	Mouse cannot work under BIOS, keyboard works fine
	Bezel X install problem
	Bezel X安裝問題
	Can I can go back to the main page to choose port again when Putty a KA7140 from KN?


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you