ATEN Global Service Site


Subject :
	PN0108 is controlled via SN0108

Description :
	How to connect the PN0108 to SN0108 for controlling via serial port?

Solution :
	1. The port configuration of SN must follow below item. baud rate: 38400 Parity: None Data bits: 8 Stop bits:1 Flow Control: none 2. Using SA0142 adapter connect to PON IN port of PN0108. 3. Telnet to PN0108 then key in: ??? To bring up the PN0108’s menu.

Related FAQ :
	SN0116A / Serial Tunnel
	IR 신호 범위/주파수
	ボタンを押しても反応しない(VK108US)
	CS14 Hotkey switch
	KH1516i IP firmware upgrade failure


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you