|
1. First, download the latest firmware from Aten website. (http://www.aten.com/download/download_fw.php)
2. Using the firmware upgrade cable connect to a com port from your computer to the CS1734A firmware upgrade port.
3. Remove all of the cable from CS1734A.
4. Remove power adapter. (If you don’t have power adapter, skip this step)
5. Slide the firmware upgrade switch to the upgrade position.
6. The front panel LED blinking after the PC cable return to the CS1734A.
7. Run the firmware package file then follow the step to complete firmware upgrade.
8. Remove all of the cable from CS1734A.
9. Slide the firmware upgrade switch to the normal position.
10. You could use it normally after return all of the cable.
|