ATEN Global Service Site


Subject :
	CL1758 switches to Sun server and get no display.

Description :
	If I switch the CL1758 to another port when the Sun server is rebooting, I get no display when I switch back to it. However, if I keep the focus on the SUN server until it finishes the booting process, everything works OK. Is there a way to fix this?

Solution :
	Yes. This situation is caused by the DDC. When you switch the CL1758 to another port when the Sun server is rebooting, the Sun server will use the highest resolution -- 1920x1440, but the CL1758 can't support this resolution, so the monitor doesn’t display anything. Solution: 1. Change the display setting on SUN server to a resolution of 1024x768 or 1280x1024, which the CL1758 can support.

Related FAQ :
	2 different sources
	ACアダプターの型番を知りたい(CS1708/CS1716)
	IC485S/SI/SN和RS232的baud rate
	KN9108獨立KVM Access Buses
	VC925/VC965/VC985的驱动


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you