ATEN Global Service Site


Subject :
	CS1782A firmware upgrade fail

Description :
	CS1782A firmware is upgraded fail, and it cannot be used anymore. How should I do to let it work?

Solution :
	Please follow the below steps to let your KVM work again! 1. Power off the CS1782A by removing the power jack. 2. Invoke Firmware Upgrade Mode by holding down the Port 1 pushbutton in the front panel and power on the CS1782A. The orange LEDs flash together. 3. Do the firmware upgrade procedure again. If your CS1782A is still not working after upgrading, please contact your local supplier for RMA.

Related FAQ :
	HPE製Gen10サーバーと組み合わせた時に映像が出力されない(KVM製品)
	リモート操作でマウスカーソルがずれる(KNxxxxVAシリーズ)
	Audio de-embedding for VM6404HB
	Bandwidth consumption with only keyboard, mouse & video but without virtual media
	Cat6 / Cat7 케이블


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you