ATEN Global Service Site


Subject :
	CS1762A firmware upgrade fail

Description :
	CS1762A firmware is upgraded fail, and it cannot be used anymore. How should I do to let it work?

Solution :
	Please follow the below steps to let your KVM work again! 1. Power off the CS1762A by removing the power jack. 2. Invoke Firmware Upgrade Mode by holding down the Port 1 pushbutton in the front panel and power on the CS1762A. The orange LEDs flash together. 3. Do the firmware upgrade procedure again. If your CS1762A is still not working after upgrading, please contact your local supplier for RMA. Note : you can download the latest firmware at the following link: http://www.aten.com/download/download_fw.php

Related FAQ :
	KN4140v- 列出已关机的计算机
	CCVSR / FPS 祯数
	CE610 supports resolution and distance.
	KN4124v 마우스 DynaSync 모드
	VC880 need to connect the audio cable?


Was this information helpful?		Y N
Any commend for this FAQ?

Thank you for your valueable comment!!!!

If you need more assistance, please click the button on the right (Ask Question) and one of our experts will help you